Automation Direct Terminator I/O Profibus DP Base Controller T1H–PBC Profibus Base Controller AUTD0607.GSD - 8 Сентября 2025

Главная » » Automation Direct Terminator I/O Profibus DP Base Controller T1H–PBC Profibus Base Controller AUTD0607.GSD

14:24

Automation Direct Terminator I/O Profibus DP Base Controller T1H–PBC Profibus Base Controller AUTD0607.GSD

AUTD0607.GSD - V0.2 T1H–PBC Profibus Base Controller GSD File

AUTD0607.zip - V0.4 T1H–PBC Profibus Base Controller GSD File

;======================================================
; GSD File For AutomationDirect.com T1H-PBC
; using the SPC3 ASIC
; Version: V0.2
;======================================================
#Profibus_DP
GSD_Revision=2

;General parameters
Vendor_Name = "AutomationDirect.com"
Model_Name = "T1H-PBC"
Revision = "V1.2"
Ident_Number = 0x0607
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release= "REV. A"
Software_Release= "REV 1.2"
9.6_supp = 1
19.2_supp = 1
45.45_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_45.45 = 250
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
Redundancy = 0
Repeater_Ctrl_Sig=0
24V_Pins = 0
Implementation_Type = "ASIC, SPC3"
Bitmap_Device = "Bitmap1N"
Bitmap_Diag = "Bitmap1D"
Bitmap_SF = "Bitmap1S"
; Slave-Specification:
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Set_Slave_Add_Supp = 0
Auto_Baud_supp = 1
Min_Slave_Intervall = 1
Fail_Safe = 0
Max_Diag_Data_Len = 244
Modul_Offset = 1
Slave_Family = 3@Terminator
Modular_Station = 1
Max_INPUT_Len           = 244
Max_Output_Len               = 244
Max_Data_len               = 488
Max_Module                   = 32

; UserPrmData: Length and Preset:
Max_User_Prm_Data_Len= 160 ; 32 Bytes reserved for profibus module + 4 bytes per slot

PrmText=0
Text(0)="Outputs Disabled"
Text(1)="Outputs Enabled"
EndPrmText
PrmText=1
Text(0)="Unipolar"
Text(1)="Bipolar"
EndPrmText
PrmText=2
Text(0)="5V Range"
Text(1)="10V Range"
EndPrmText
PrmText=3
Text(0)="0..20mA"
Text(1)="4..20mA"
EndPrmText
PrmText=4
Text(0)="Auto"
Text(1)="Manual"
EndPrmText
PrmText=5
Text(0)="Normal"
Text(1)="Fast"
EndPrmText
PrmText=6
Text(0)="All Channels Enabled"
Text(1)="Channel 1 Enabled"
Text(2)="Channels 1-2 Enabled"
Text(3)="Channels 1-3 Enabled"
Text(4)="Channels 1-4 Enabled"
Text(5)="Channels 1-5 Enabled"
Text(6)="Channels 1-6 Enabled"
Text(7)="Channels 1-7 Enabled"
Text(8)="Channels 1-8 Enabled"
Text(9)="Channels 1-9 Enabled"
Text(10)="Channels 1-10 Enabled"
Text(11)="Channels 1-11 Enabled"
Text(12)="Channels 1-12 Enabled"
Text(13)="Channels 1-13 Enabled"
Text(14)="Channels 1-14 Enabled"
Text(15)="Channels 1-15 Enabled"
Text(16)="Channels 1-16 Enabled"
EndPrmText

ExtUserPrmData=0 "Status"
Bit(0) 1 0-1
Prm_Text_Ref=0
EndExtUserPrmData

ExtUserPrmData=1 "Unipolar/Bipolar"
Bit(1) 0 0-1
Prm_Text_Ref=1
EndExtUserPrmData

ExtUserPrmData=2 "Voltage Range"
Bit(2) 0 0-1
Prm_Text_Ref=2
EndExtUserPrmData

ExtUserPrmData=3 "Current Range"
Bit(3) 0 0-1
Prm_Text_Ref=3
EndExtUserPrmData

ExtUserPrmData=4 "Hot-Swap Mode"
Bit(0) 0 0-1
Prm_Text_Ref=4
EndExtUserPrmData

ExtUserPrmData=5 "Reserved"
Unsigned8 0 0-255
EndExtUserPrmData

ExtUserPrmData=6 "System Use"
Unsigned8 0 0-255
EndExtUserPrmData

ExtUserPrmData=7 "Channels Enabled"
BitArea(0-4) 0 0-31
Prm_Text_Ref=6
EndExtUserPrmData

ExtUserPrmData=8 "Response Mode"
Bit(7) 0 0-1
Prm_Text_Ref=5
EndExtUserPrmData

Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0)=6

Ext_User_Prm_Data_Const(1) = 0x00
Ext_User_Prm_Data_Ref(1)=4

Ext_User_Prm_Data_Const(2) = 0x00
Ext_User_Prm_Data_Ref(2)=5

Ext_User_Prm_Data_Const(3) = 0x00
Ext_User_Prm_Data_Ref(3)=5

Ext_User_Prm_Data_Const(4) = 0x00
Ext_User_Prm_Data_Ref(4)=5

Ext_User_Prm_Data_Const(5) = 0x00
Ext_User_Prm_Data_Ref(5)=5

Ext_User_Prm_Data_Const(6) = 0x00
Ext_User_Prm_Data_Ref(6)=5

Ext_User_Prm_Data_Const(7) = 0x00
Ext_User_Prm_Data_Ref(7)=5

Ext_User_Prm_Data_Const(8) = 0x00
Ext_User_Prm_Data_Ref(8)=5

Ext_User_Prm_Data_Const(9) = 0x00
Ext_User_Prm_Data_Ref(9)=5

Ext_User_Prm_Data_Const(10) = 0x00
Ext_User_Prm_Data_Ref(10)=5

Ext_User_Prm_Data_Const(11) = 0x00
Ext_User_Prm_Data_Ref(11)=5

Ext_User_Prm_Data_Const(12) = 0x00
Ext_User_Prm_Data_Ref(12)=5

Ext_User_Prm_Data_Const(13) = 0x00
Ext_User_Prm_Data_Ref(13)=5

Ext_User_Prm_Data_Const(14) = 0x00
Ext_User_Prm_Data_Ref(14)=5

Ext_User_Prm_Data_Const(15) = 0x00
Ext_User_Prm_Data_Ref(15)=5

Ext_User_Prm_Data_Const(16) = 0x00
Ext_User_Prm_Data_Ref(16)=5

Ext_User_Prm_Data_Const(17) = 0x00
Ext_User_Prm_Data_Ref(17)=5

Ext_User_Prm_Data_Const(18) = 0x00
Ext_User_Prm_Data_Ref(18)=5

Ext_User_Prm_Data_Const(19) = 0x00
Ext_User_Prm_Data_Ref(19)=5

Ext_User_Prm_Data_Const(20) = 0x00
Ext_User_Prm_Data_Ref(20)=5

Ext_User_Prm_Data_Const(21) = 0x00
Ext_User_Prm_Data_Ref(21)=5

Ext_User_Prm_Data_Const(22) = 0x00
Ext_User_Prm_Data_Ref(22)=5

Ext_User_Prm_Data_Const(23) = 0x00
Ext_User_Prm_Data_Ref(23)=5

Ext_User_Prm_Data_Const(24) = 0x00
Ext_User_Prm_Data_Ref(24)=5

Ext_User_Prm_Data_Const(25) = 0x00
Ext_User_Prm_Data_Ref(25)=5

Ext_User_Prm_Data_Const(26) = 0x00
Ext_User_Prm_Data_Ref(26)=5

Ext_User_Prm_Data_Const(27) = 0x00
Ext_User_Prm_Data_Ref(27)=5

Ext_User_Prm_Data_Const(28) = 0x00
Ext_User_Prm_Data_Ref(28)=5

Ext_User_Prm_Data_Const(29) = 0x00
Ext_User_Prm_Data_Ref(29)=5

Ext_User_Prm_Data_Const(30) = 0x00
Ext_User_Prm_Data_Ref(30)=5

Ext_User_Prm_Data_Const(31) = 0x00
Ext_User_Prm_Data_Ref(31)=5

FixPresetModules=1

Module="ON-BOARD-IO 16 DO" 0x21
Preset=1
EndModule

; DISCRETE INPUT MODULES
Module="8 POINT DISCRETE INPUT" 0x10
EndModule
Module="16 POINT DISCRETE INPUT" 0x11
EndModule

; DISCRETE OUTPUT MODULES
Module="8 POINT DISCRETE OUTPUT" 0x20
EndModule
Module="16 POINT DISCRETE OUTPUT" 0x21
EndModule

; ANALOG INPUT MODULES
Module="8 CHANNEL ANALOG INPUT" 0x57
EndModule
Module="14 CHANNEL ANALOG INPUT" 0x5F
EndModule
Module="16 CHANNEL ANALOG INPUT" 0x5F
EndModule

; Configurable Analog Input Modules
Module="8 CH ANALOG INPUT CONFIGURABLE" 0x41,0x47,0x01
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 7
Ext_User_Prm_Data_Ref(0) = 8
EndModule
Module="14 CH ANALOG INPUT CONFIGURABLE" 0x41,0x4F,0x01
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 7
Ext_User_Prm_Data_Ref(0) = 8
EndModule
Module="16 CH ANALOG INPUT CONFIGURABLE" 0x41,0x4F,0x01
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 7
Ext_User_Prm_Data_Ref(0) = 8
EndModule

; ANALOG OUTPUT MODULES
Module="8 CHANNEL ANALOG VOLTAGE OUTPUT" 0x67
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(0) = 2
EndModule
Module="8 CHANNEL ANALOG CURRENT OUTPUT" 0x67
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 3
EndModule
Module="16 CHANNEL ANALOG VOLTAGE OUTPUT" 0x6F
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(0) = 2
EndModule
Module="16 CHANNEL ANALOG CURRENT OUTPUT" 0x6F
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 3
EndModule

; COMBINATION ANALOG INPUT/ANALOG OUTPUT MODULE
Module="8 IN / 4 OUT VOLTAGE ANALOG" 0xC0,0x43,0x47
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(0) = 2
EndModule

Module="8 IN / 4 OUT CURRENT ANALOG" 0xC0,0x43,0x47
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 3
EndModule

; INPUT MODULES
Module="T1K-08ND3 8PT DISCRETE INPUT" 0x10
EndModule
Module="T1K-16ND3 16PT DISCRETE INPUT" 0x11
EndModule
Module="T1K-08NA-1 8PT DISCRETE INPUT" 0x10
EndModule
Module="T1K-16NA-1 16PT DISCRETE INPUT" 0x11
EndModule

; OUTPUT MODULES
Module="T1K-08TD1 8PT DISCRETE OUTPUT" 0x20
EndModule
Module="T1K-16TD1 16PT DISCRETE OUTPUT" 0x21
EndModule
Module="T1K-16TD2 16PT DISCRETE OUTPUT" 0x21
EndModule
Module="T1K-08TA 8PT DISCRETE OUTPUT" 0x20
EndModule
Module="T1K-08TAS 8PT DISCRETE OUTPUT" 0x20
EndModule
Module="T1K-16TA 16PT DISCRETE OUTPUT" 0x21
EndModule
Module="T1K-08TR 8PT DISCRETE OUTPUT" 0x20
EndModule
Module="T1K-16TR 16PT DISCRETE OUTPUT" 0x21
EndModule
Module="T1K-08TRS 8PT DISCRETE OUTPUT" 0x20
EndModule

; ANALOG INPUT MODULES
Module="T1F-08AD-1 8CH ANALOG INPUT" 0x57
EndModule
Module="T1F-08AD-2 8CH ANALOG INPUT" 0x57
EndModule
Module="T1F-16AD-1 16CH ANALOG INPUT" 0x5F
EndModule
Module="T1F-16AD-2 16CH ANALOG INPUT" 0x5F
EndModule
Module="T1F-14THM 14CH THERMOCOUPLE" 0x5F
EndModule
Module="T1F-16RTD 16CH RTD" 0x5F
EndModule

; ANALOG OUTPUT MODULES
Module="T1F-08DA-1 8CH ANALOG OUTPUT" 0x67
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 3
EndModule

Module="T1F-08DA-2 8CH ANALOG OUTPUT" 0x67
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(0) = 2
EndModule

Module="T1F-16DA-1 16CH ANALOG OUTPUT" 0x6F
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 3
EndModule

Module="T1F-16DA-2 16CH ANALOG OUTPUT" 0x6F
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(0) = 2
EndModule

; COMBINATION ANALOG INPUT/ANALOG OUTPUT MODULE
Module="T1F-8AD4DA-1 8I4O CURRENT ANALOG" 0xC0,0x43,0x47
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 3
EndModule
Module="T1F-8AD4DA-2 8I4O VOLTAGE ANALOG" 0xC0,0x43,0x47
Ext_Module_Prm_Data_Len = 1
Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 0
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(0) = 2
EndModule

; T1H-CTRIO Counter MODULE
; 48 Bytes Output and 40 Bytes Input
Module="T1H-CTRIO Counter Module" 0xC0,0xAF,0xA7
EndModule

Категория: industrial equipment | Просмотров: 68 | Добавил: gt7600 | Рейтинг: 0.0/0

Всего комментариев: 0

Логин:
Пароль:

« Сентябрь 2025 »
Пн	Вт	Ср	Чт	Пт	Сб	Вс
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30