LENZ081B.GSE
82evm1.bmp
E82ZAFPC201__PROFIBUS-IO_FIF_module__v4-0__EN.pdf - Module EDS82ZAFPC201 L−force Communication Manual
; (c) Lenze
;
; Profibus-DP GSE-File (Geraetestammdatei)
;
; Author: ELE/Industrial Communication (TH)
; Date of creation: 14.10.1998
; Changes: 03.08.2000 Prozessdata consistency added
; 10.10.2002 Umfirmierung
; 19.03.2004 Modifications for new modul V201
; Profidrive added
; 10.02.2005 DPV1 Parameters added
; 11.10.2006 I&M0 functionality
;
; Allgemeine Angaben:
;
#Profibus_DP
;
GSD_Revision = 4
;
; Herstellername
Vendor_Name = "Lenze"
;
; Herstellerbezeichnung des DP-Geraetes
Model_Name="E82ZAFPC2XX"
;
; Ausgabestand des DP-Geraetes
Revision = "V1.0"
;
; Ident-Nummer
Ident_Number = 0x081b
;
; Protokollkennung des DP-Geraetes
; 0: Profibus-DP
; 16-255: Herstellerspezifisch
Protocol_Ident = 0
;
; DP-Geraetetyp
; 0: DP-Slave
; 1: DP-Master Klasse 1
Station_Type = 0
;
; kein FMS/DP-Mischgeraet
FMS_supp = 0
;
; Hardware Ausgabestand des DP-Geraetes
Hardware_Release = "2A"
;
; Software Ausgabestand des DP-Geraetes
Software_Release = "1.0"
;
9.6_supp = 1
19.2_supp = 1
45.45_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
;
MaxTsdr_9.6 = 15
MaxTsdr_19.2 = 15
MaxTsdr_45.45 = 15
MaxTsdr_93.75 = 15
MaxTsdr_187.5 = 15
MaxTsdr_500 = 15
MaxTsdr_1.5M = 25
MaxTsdr_3M = 50
MaxTsdr_6M = 100
MaxTsdr_12M = 200
;
; keine redundante Uebertragungstechnik
Redundancy = 0
;
; RTS-Signalpegel (CNTR-P) Pin 4 des 9pol. SUB-D
; 0: nicht vorhanden
; 1: RS 485
; 2: TTL
Repeater_Ctrl_Sig = 2
;
; Bedeutung der 24V Pins des 9pol. SUB-D (Pin 7 24V; Pin 2 GND)
; 0: nicht angeschlossen
; 1: Input
; 2: Output
24V_Pins = 0
;
Implementation_Type = "Asic solution"
;
Bitmap_Device = "82evm1"
Bitmap_Diag = "82evm2"
Bitmap_SF = "82evm3"
;
; Slave spezifische Werte
;
; Freeze-Mode wird nicht unterstuetzt
Freeze_Mode_supp = 0
;
; Sync-Mode wird unterstuetzt
Sync_Mode_supp = 1
;
; Automatische Baudratenerkennung wird unterstuetzt
Auto_Baud_supp = 1
;
; Slave-Adresse kann nicht vom Master gesetzt werden
Set_Slave_Add_supp = 0
;
; Hoechstlaenge von User_Param_Data
User_Prm_Data_Len = 3
;
; Default-Wert fuer User_Param_Data
;User_Param_Data = 0
;
; Mindestabstand zwischen 2 Slavelistenumlaeufen fuer das DP-Geraet
; (xx * 100us)
Min_Slave_Intervall = 1
;
; Modulare Station
Modular_Station = 1
;
; Hoechstanzahl der Module einer Modularen Station
Max_Module = 1
;
; Hoechstlaenge der Eingangsdaten einer Modularen Station
Max_Input_Len = 40
;
; Hoechstlaenge der Ausgangsdaten einer Modularen Station
Max_Output_Len = 40
;
; Groesste Summe der Ein- und Ausgangsdaten einer Modularen Station in Bytes
Max_Data_Len = 80
;
Max_Diag_Data_Len = 10
;
Slave_Family=1@Lenze
;
Fail_Safe=0
;--- GSD R3 slave extensions ---
;Info_Text = "DP-Slave FIOF mit DP-V1-Schnittstelle(azyklische Kommunikation)"
DPV1_Slave = 1
C1_Read_Write_supp = 1
C2_Read_Write_supp = 1
C1_Max_Data_Len = 240
C2_Max_Data_Len = 240
C1_Response_Timeout = 100
C2_Response_Timeout = 100
;C1_Read_Write_required = 0
;C2_Read_Write_required = 0
C2_Max_Count_Channels = 1
Max_Initiate_PDU_Length = 64
;DPV1_Data_Types = 0
;WD_Base_1ms_supp = 1
;Check_Cfg_Mode = 0
;Publisher_supp = 1
;--- GSD R4 slave extensions ---
;Prm_Block_Structure_supp = 1
;Prm_Block_Structure_req = 0
; isochron mode
;Isochron_Mode_supp = 1
;Isochron_Mode_required = 0
;TBASE_DP = 1500 ; * 1/12 µs = 125 µs
;TDP_MIN = 8 ; * TBASE_DP = 1000 µs
;TDP_MAX = 256 ; * TBASE_DP = 32 ms
;T_PLL_W_MAX = 12 ; * 1/12 µs = 1 µs
;TBASE_IO = 1500 ; * 1/12 µs = 125 µs
;TI_MIN = 1 ; * TBASE_IO
;TO_MIN = 1 ; * TBASE_IO
; DXB
;Subscriber_supp = 0
;DXB_Max_Link_Count = 16
;DXB_Max_Data_Length = 244
;--- DP-V1 Alarm ---
;Diagnostic_Alarm_supp = 1
;Process_Alarm_supp = 1
;Pull_Plug_Alarm_supp = 1
;Status_Alarm_supp = 1
;Update_Alarm_supp = 1
;Manufacturer_Specific_Alarm_supp = 0
;Alarm_Sequence_Mode_Count = 3
;Alarm_Type_Mode_supp = 1
;Diagnostic_Alarm_required = 1
;--- I&M Funktionality ---
Ident_Maintenance_supp=1
;--- UsrPrmData Definitions ----------------------------------------
;Max_User_Prm_Data_Len = 31
;Ext_User_Prm_Data_Const(0) = 0,0,0
; Modulkennzeichnung
;
;************* mit konsistentem Drivecom Parameterkanal ***************
Module = "Drivecom-PAR(Cons)+PZD(1W)" 0xF3,0x70
01
EndModule
Module = "Drivecom-PAR(Cons)+PZD(2W)" 0xF3,0x71
02
EndModule
Module = "Drivecom-PAR(Cons)+PZD(3W)" 0xF3,0x72
03
EndModule
Module = "Drivecom-PAR(Cons)+PZD(4W)" 0xF3,0x73
04
EndModule
Module = "Drivecom-PAR(Cons)+PZD(5W)" 0xF3,0x74
05
EndModule
Module = "Drivecom-PAR(Cons)+PZD(6W)" 0xF3,0x75
06
EndModule
Module = "Drivecom-PAR(Cons)+PZD(7W)" 0xF3,0x76
07
EndModule
Module = "Drivecom-PAR(Cons)+PZD(8W)" 0xF3,0x77
08
EndModule
Module = "Drivecom-PAR(Cons)+PZD(9W)" 0xF3,0x78
09
EndModule
Module = "Drivecom-PAR(Cons)+PZD(10W)" 0xF3,0x79
10
EndModule
;
;****** mit konsistentem Drivecom Parameterkanal und konsisten PZD *****
Module = "Drivecom-PAR(Cons)+PZD(1W Cons)" 0xF3,0xF0
11
EndModule
Module = "Drivecom-PAR(Cons)+PZD(2W Cons)" 0xF3,0xF1
12
EndModule
Module = "Drivecom-PAR(Cons)+PZD(3W Cons)" 0xF3,0xF2
13
EndModule
Module = "Drivecom-PAR(Cons)+PZD(4W Cons)" 0xF3,0xF3
14
EndModule
Module = "Drivecom-PAR(Cons)+PZD(5W Cons)" 0xF3,0xF4
15
EndModule
Module = "Drivecom-PAR(Cons)+PZD(6W Cons)" 0xF3,0xF5
16
EndModule
Module = "Drivecom-PAR(Cons)+PZD(7W Cons)" 0xF3,0xF6
17
EndModule
Module = "Drivecom-PAR(Cons)+PZD(8W Cons)" 0xF3,0xF7
18
EndModule
Module = "Drivecom-PAR(Cons)+PZD(9W Cons)" 0xF3,0xF8
19
EndModule
Module = "Drivecom-PAR(Cons)+PZD(10W Cons)" 0xF3,0xF9
20
EndModule
;
;********* mit konsistentem Profidrive Parameterkanal ***************
Module = "PKW(Cons)+PZD(1W)" 0x00,0xF3,0x70
21
EndModule
Module = "PKW(Cons)+PZD(2W)" 0x00,0xF3,0x71
22
EndModule
Module = "PKW(Cons)+PZD(3W)" 0x00,0xF3,0x72
23
EndModule
Module = "PKW(Cons)+PZD(4W)" 0x00,0xF3,0x73
24
EndModule
Module = "PKW(Cons)+PZD(5W)" 0x00,0xF3,0x74
25
EndModule
Module = "PKW(Cons)+PZD(6W)" 0x00,0xF3,0x75
26
EndModule
Module = "PKW(Cons)+PZD(7W)" 0x00,0xF3,0x76
27
EndModule
Module = "PKW(Cons)+PZD(8W)" 0x00,0xF3,0x77
28
EndModule
Module = "PKW(Cons)+PZD(9W)" 0x00,0xF3,0x78
29
EndModule
Module = "PKW(Cons)+PZD(10W)" 0x00,0xF3,0x79
30
EndModule
;
;*** mit konsistentem Profidrive Parameterkanal und konsisten PZD ****
Module = "PKW(Cons)+PZD(1W Cons)" 0x00,0xF3,0xF0
31
EndModule
Module = "PKW(Cons)+PZD(2W Cons)" 0x00,0xF3,0xF1
32
EndModule
Module = "PKW(Cons)+PZD(3W Cons)" 0x00,0xF3,0xF2
33
EndModule
Module = "PKW(Cons)+PZD(4W Cons)" 0x00,0xF3,0xF3
34
EndModule
Module = "PKW(Cons)+PZD(5W Cons)" 0x00,0xF3,0xF4
35
EndModule
Module = "PKW(Cons)+PZD(6W Cons)" 0x00,0xF3,0xF5
36
EndModule
Module = "PKW(Cons)+PZD(7W Cons)" 0x00,0xF3,0xF6
37
EndModule
Module = "PKW(Cons)+PZD(8W Cons)" 0x00,0xF3,0xF7
38
EndModule
Module = "PKW(Cons)+PZD(9W Cons)" 0x00,0xF3,0xF8
39
EndModule
Module = "PKW(Cons)+PZD(10W Cons)" 0x00,0xF3,0xF9
40
EndModule
;
;************* Prozessdaten *************************
Module = "PZD(1W)" 0x70
41
EndModule
Module = "PZD(2W)" 0x71
42
EndModule
Module = "PZD(3W)" 0x72
43
EndModule
Module = "PZD(4W)" 0x73
44
EndModule
Module = "PZD(5W)" 0x74
45
EndModule
Module = "PZD(6W)" 0x75
46
EndModule
Module = "PZD(7W)" 0x76
47
EndModule
Module = "PZD(8W)" 0x77
48
EndModule
Module = "PZD(9W)" 0x78
49
EndModule
Module = "PZD(10W)" 0x79
50
EndModule
;
;************* Prozessdaten mit Konsistenz **********
Module = "PZD(1W Cons)" 0xF0
51
EndModule
Module = "PZD(2W Cons)" 0xF1
52
EndModule
Module = "PZD(3W Cons)" 0xF2
53
EndModule
Module = "PZD(4W Cons)" 0xF3
54
EndModule
Module = "PZD(5W Cons)" 0xF4
55
EndModule
Module = "PZD(6W Cons)" 0xF5
56
EndModule
Module = "PZD(7W Cons)" 0xF6
57
EndModule
Module = "PZD(8W Cons)" 0xF7
58
EndModule
Module = "PZD(9W Cons)" 0xF8
59
EndModule
Module = "PZD(10W Cons)" 0xF9
60
EndModule
;
|
