PG210e.gsd - 1831357.zip

202964_eng.pdf - PROFIBUS interface WCS interface module WCS-PG210E Datasheet

tdoct3786a_eng.pdf - Manual WCS Position Encoding System Electrical

tdoct3785c_eng.pdf - WCS position encoding system Mechanics Manual

tdoct1329_eng.pdf - Instruction manual WCS interface module PROFIBUS WCS-PG201E

#Profibus_DP
;
; Historie:
; =========
; V5.9  15.12.2003 La GSD_Revision auf 3 erhцht, "Publisher_supp = 1" eingefьgt, 3 User-Para neu
; V7.31 20.05.2007 La Erweiterung um Speed-Ьbertragung
;
;
GSD_Revision        = 3
;
Vendor_Name         = "PEPPERL+FUCHS"
Model_Name          = "WCS-PG210e"
Revision            = "V7.31"
Ident_Number        = 0x2079
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "Revision R"
Software_Release    = "V7.31"
OrderNumber                 = "WCS-PG210e" 
;
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
Publisher_supp      = 1        ;data transfer to other salves possible (DPV2-publisher)
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "VPC3+B"
Bitmap_Device             = "DAGW"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 1
Modular_Station     = 1
Max_Module          = 1
Max_Input_Len       = 24
Max_Output_Len      = 1
Max_Data_Len        = 25
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 9@Pepperl+Fuchs@WCS
Max_Diag_Data_Len   = 8
;
Max_User_Prm_Data_Len= 3
Ext_User_Prm_Data_Const(0)=0x00,0x00,0x00
;
Module="P+F (1 reading head only Pos)" 0x20,0xD1
1
EndModule
Module             = "P+F (2 reading heads only pos)" 0x20,0xD1,0xD1
2
EndModule
Module             = "P+F (3 reading heads only pos)" 0x20,0xD1,0xD1,0xD1
3
EndModule
Module             = "P+F (4 reading heads only pos)" 0x20,0xD1,0xD1,0xD1,0xD1
4
EndModule
Module             = "P+F (1 reading head pos+speed)" 0x20,0xD2
5
EndModule
Module             = "P+F (2 reading heads pos+speed)" 0x20,0xD2,0xD2
6
EndModule
Module             = "P+F (3 reading heads pos+speed)" 0x20,0xD2,0xD2,0xD2
7
EndModule
Module             = "P+F (4 reading heads pos+speed)" 0x20,0xD2,0xD2,0xD2,0xD2
8
EndModule