PAUT04AA.zip
;===============================================================
;
; Process Automation Profibus GSD file for Profi-200DP
; Revisions:
; -Rev 00 - Initial release.
; -Rev 01 - Added support for 45.45 kbit/s
; - Changed Min_Slave_Intervall from 10 to 6 (600us) in accordance with
; the latest GSD file checker (GSD-Editor Version 4.1).
; - Added support for extra I/Os up to 32 In / 8 Out. The Profi-200DP
; software must be rev 02 or higher to support these !!!!
; - Kept the LA-200 Module for compatibility with Profi-200DP
; Rev 01/00 software.
;
;===============================================================
;===============================================================
;
; Process Automation Profibus GSD file for Profi-200DP
; Revisions:
; -Rev 00 - Initial release.
; -Rev 01 - Added support for 45.45 kbit/s
; - Changed Min_Slave_Intervall from 10 to 6 (600us) in accordance with
; the latest GSD file checker (GSD-Editor Version 4.1).
; - Added support for extra I/Os up to 32 In / 8 Out. The Profi-200DP
; software must be rev 02 or higher to support these !!!!
; - Kept the LA-200 Module for compatibility with Profi-200DP
; Rev 01/00 software.
;
;===============================================================
#Profibus_DP
GSD_Revision = 2
;
Vendor_Name = "Process Automation (Pty) Ltd."
Model_Name = "Profi-200DP"
Revision = "Rev 01"
Ident_Number = 0x04AA
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release = "Rev 00"
Software_Release = "Rev 02"
;
9.6_supp = 1
19.2_supp = 1
45.45_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
;
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_45.45 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
;
Redundancy = 0
Repeater_Ctrl_Sig = 2
24V_Pins = 0
Implementation_Type = "SPC3"
;
Freeze_Mode_supp = 0
Sync_Mode_supp = 0
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0
;
Min_Slave_Intervall = 6
;
Modular_Station = 1
Max_Module = 1
Max_Input_Len = 32
Max_Output_Len = 8
Max_Data_Len = 40
Modul_Offset = 1
;
Fail_Safe = 0
Slave_Family = 0
Max_Diag_Data_Len = 6
;++++++ Compatibility With Profi-200DP Software Rev 00/01 will work with 02 +++++++
Module = "LA200 4 Outputs / 8 Inputs" 0x17,0x23
EndModule
;
;+++++ Inputs - Will only work with Profi-200DP Software Rev 02 or Later ++++++
Module = "INPUT: 4 Byte" 0x13
EndModule
;
Module = "INPUT: 8 Byte" 0x17
EndModule
;
Module = "INPUT: 12 Byte" 0x1B
EndModule
;
Module = "INPUT: 16 Byte" 0x1F
EndModule
;
Module = "INPUT: 20 Byte" 0x59
EndModule
;
Module = "INPUT: 24 Byte" 0x5B
EndModule
;
Module = "INPUT: 28 Byte" 0x5D
EndModule
;
Module = "INPUT: 32 Byte" 0x5F
EndModule
;
;++++++ I/O - Will only work with Profi-200DP Software Rev 02 or Later +++++++
Module = "4 Outputs, 4 Inputs" 0xC0, 0x03, 0x03
EndModule
;
Module = "8 Outputs, 4 Inputs" 0xC0, 0x07, 0x03
EndModule
;
Module = "4 Outputs, 8 Inputs" 0xC0, 0x03, 0x07
EndModule
;
Module = "8 Outputs, 8 Inputs" 0xC0, 0x07, 0x07
EndModule
;
Module = "4 Outputs, 12 Inputs" 0xC0, 0x03, 0x0B
EndModule
;
Module = "8 Outputs, 12 Inputs" 0xC0, 0x07, 0x0B
EndModule
;
Module = "4 Outputs, 16 Inputs" 0xC0, 0x03, 0x0F
EndModule
;
Module = "8 Outputs, 16 Inputs" 0xC0, 0x07, 0x0F
EndModule
;
Module = "4 Outputs, 20 Inputs" 0xC0, 0x03, 0x13
EndModule
;
Module = "8 Outputs, 20 Inputs" 0xC0, 0x07, 0x13
EndModule
;
Module = "4 Outputs, 24 Inputs" 0xC0, 0x03, 0x17
EndModule
;
Module = "8 Outputs, 24 Inputs" 0xC0, 0x07, 0x17
EndModule
;
Module = "4 Outputs, 28 Inputs" 0xC0, 0x03, 0x1B
EndModule
;
Module = "8 Outputs, 28 Inputs" 0xC0, 0x07, 0x1B
EndModule
;
Module = "4 Outputs, 32 Inputs" 0xC0, 0x03, 0x1F
EndModule
;
Module = "8 Outputs, 32 Inputs" 0xC0, 0x07, 0x1F
EndModule
;
; |