PAUT1110.zip

;===============================================================================
; Process Automation Profibus GSD file for the Model 166 Profibus PA Interface
;
; Model:       Model 166 Profibus PA Interface
; Description: Model 166 Profibus PA slave
; Language:    English
; Author:      Process Automation (Pty) Ltd.
; WWW:         www.process-auto.com
;
; Revisions:
; Rev 00 - Initial version. ict
; Rev 01 - Revised - 21 January 2019. ict
;===============================================================================  

;===============================================================================
;
; Process Automation Profibus GSD file for the Model 166 Profibus PA Interface
;
; Model:       Model 166 Profibus PA Interface
; Description: Model 166 Profibus PA slave
; Language:    English
; Author:      Process Automation (Pty) Ltd.
; WWW:         www.process-auto.com
;
; Revisions:
; Rev 00 - Initial version. ict
; Rev 01 - Revised - 21 January 2019. ict
;
;===============================================================================
#Profibus_DP

GSD_Revision        = 5

Vendor_Name         = "Process Automation (Pty) Ltd."
Model_Name          = "Model 166 Profibus PA Interface"
Revision            = "1.0"
Ident_Number        = 0x1110
Protocol_Ident      = 0                ; DP protocol
Station_Type        = 0                ; Slave device
FMS_supp            = 0                ; FMS not supported
Hardware_Release    = "0.00"
Software_Release    = "0.00"
Bitmap_Device       = "-"
31.25_supp          = 1
45.45_supp          = 1
93.75_supp          = 1
MaxTsdr_31.25       = 100
MaxTsdr_45.45       = 250
MaxTsdr_93.75       = 1000
Redundancy          = 0                ; N/A
Repeater_Ctrl_Sig   = 0                ; N/A
24V_Pins            = 0                ; N/A
Implementation_Type = "DPC31"
Freeze_Mode_supp    = 0                ; Not supported
Sync_Mode_supp      = 0                ; Not supported
Set_Slave_Add_supp  = 0                ; Not supported
Min_Slave_Intervall = 250
Modular_Station     = 1
Max_Module          = 15
Max_Input_Len       = 75                   ; maximum Input Length
Max_Output_Len      = 0                    ; maximum Output Length
Max_Data_Len        = 75                   ; maximum In-Output Length
Slave_Family        = 12
Max_Diag_Data_Len   = 14
Max_User_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00

;----------- Description of extended DP features: ---------------------
;
DPV1_Slave = 1
Ident_Maintenance_supp  = 0                ; Not supported

C2_Read_Write_supp      = 0                ; Not supported
;C2_Max_Data_Len         = 128
;C2_Read_Write_required  = 1
;C2_Max_Count_Channels   = 1
;Max_Initiate_PDU_Length = 52
;C2_Response_Timeout     = 4000
DPV1_Data_Types         = 1

C1_Read_Write_supp      = 0                ; Not supported
;C1_Max_Data_Len         = 68
;C1_Response_Timeout     = 100  ;1 sec

;--- Description of physical interface for async. and sync. transmission: ---
Physical_Interface = 0                     ; RS-485 Standard Copper
Transmission_Delay_45.45 = 0
Reaction_Delay_45.45     = 0
Transmission_Delay_93.75 = 0
Reaction_Delay_93.75     = 0
End_Physical_Interface
;
Physical_Interface = 1                     ; IEC61158-2
Transmission_Delay_31.25 = 0
Reaction_Delay_31.25     = 0
End_Physical_Interface

;----------- Description of device related diagnosis: ---------------------
;
Unit_Diag_Bit(16)   = "Error appears"
Unit_Diag_Bit(17)   = "Error disappears"
Unit_Diag_Bit(24)   = "Hardware failure electronics"
Unit_Diag_Bit(25)   = "Hardware failure mechanics"
Unit_Diag_Bit(26)   = "Motor temperature too high"
Unit_Diag_Bit(27)   = "Electronic temperature too high"    
Unit_Diag_Bit(28)   = "Memory error"
Unit_Diag_Bit(29)   = "Measurement failure"
Unit_Diag_Bit(30)   = "Device not initialized"
Unit_Diag_Bit(31)   = "Device initialization failed"
Unit_Diag_Bit(32)   = "Zero point error"
Unit_Diag_Bit(33)   = "Power supply failed"
Unit_Diag_Bit(34)   = "Configuration invalid"
Unit_Diag_Bit(35)   = "Restart"
Unit_Diag_Bit(36)   = "Coldstart"
Unit_Diag_Bit(37)   = "Maintenance required"
Unit_Diag_Bit(38)   = "Characteristics invalid"
Unit_Diag_Bit(39)   = "Ident_Number violation"
Unit_Diag_Bit(55)   = "Extension Available"

;-------------------------------------------------------------------------

;Empty module
Module = "Empty Module"            0x00 
1
EndModule
;
;Modules for Analog Input
Module = "Analog Input (AI)"    0x94
2
EndModule

;
;-------------------------------------------------------------------------
;-------------------------------------------------------------------------
;-------------------------------------------------------------------------