
Lauer Operator Panels PCS 807-Modul SPC3
the legacy LAUSPC3X.200 descriptor, and modern *.GSD files such as LCAPCS31.GSD used for the PCS807 series
LCAPCS31_GSD.zip - LAUSPC3X.GSD LAUSPC3X.200
;*************************************************************************
;*** ***
;*** Systeme LAUER GmbH & CoKG ***
;*** D-72669 Unterensingen ***
;*** KelterstraЯe 59 ***
;*** Tel.: 07022/9660-0 ***
;*** Fax: 07022/9660-103 ***
;*** Hotline: 07022/9660-220 - 223/226 ***
;*** Fax: 07022/9669-224 ***
;*** ***
;*************************************************************************
;*** ***
;*** Filename: LAUSPC3X.GSD (c) 1998 ***
;*** Version 1.1 from 24.09.1998 ***
;*** ***
;*************************************************************************
;
; ATTENTION:
; ==========
; Changes in this file can cause configuration or communicationproblems.
;
; WICHTIGER HINWEIS
; =================
; Eine unsachgemдЯe Verдnderung der Parameter kann zu undefiniertem
; Systemverhalten des DP-Busses fьhren und geschieht in eigener
; Verantwortung !
;
;
;
#Profibus_DP
Vendor_Name = "Systeme Lauer GmbH"
Model_Name = "PCS 807-Modul SPC3"
Revision = "Version 1.100"
Ident_Number = 0x0008
Protocol_Ident = 0
Station_Type = 0
Hardware_Release = "Version -.---"
Software_Release = "Version -.---"
9.6_supp = 1
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
;
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
;
Redundancy = 0
Repeater_Ctrl_Sig = 0
24V_Pins = 0
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0
User_Prm_Data_Len = 0
;User_Prm_Data =
Min_Slave_Intervall = 5
Modular_Station = 1
Max_Module = 2
Max_Input_Len = 0x20
Max_Output_Len = 0x20
Max_Data_Len = 0x40
;
Max_Diag_Data_Len=32
;
Module = "blank space (0x00)" 0x00
EndModule
;
;*************************************************************************
;*** input byte with consistence ***
;*************************************************************************
;
Module = "8 byte input con (0x97)" 0x97
EndModule
Module = "16 byte input con (0x9F)" 0x9F
EndModule
Module = "24 byte input con (0x9F,0x97)" 0x9F,0x97
EndModule
Module = "32 byte input con (0x9F,0x9F)" 0x9F,0x9F
EndModule
;
;*************************************************************************
;*** output byte with consistence ***
;*************************************************************************
;
Module = "8 byte output con (0xA7)" 0xA7
EndModule
Module = "16 byte output con (0xAF)" 0xAF
EndModule
Module = "24 byte output con (0xAF,0xA7)" 0xAF,0xA7
EndModule
Module = "32 byte output con (0xAF,0xAF)" 0xAF,0xAF
EndModule
;
;*************************************************************************
;*** input byte without consistence ***
;*************************************************************************
;
Module = "8 byte input (0x17)" 0x17
EndModule
Module = "16 byte input (0x1F)" 0x1F
EndModule
Module = "24 byte input (0x1F,0x17)" 0x1F,0x17
EndModule
Module = "32 byte input (0x1F,0x1F)" 0x1F,0x1F
EndModule
;
;*************************************************************************
;*** output byte without consistence ***
;*************************************************************************
;
Module = "8 byte output (0x27)" 0x27
EndModule
Module = "16 byte output (0x2F)" 0x2F
EndModule
Module = "24 byte output (0x2F,0x27)" 0x2F,0x27
EndModule
Module = "32 byte output (0x2F,0x2F)" 0x2F,0x2F
EndModule |